Welcome back to Flowers Flowers Everywhere! Look at how beautifully our flower garden is growing. 

Today I want to show you how to make another dimensional flower to really make things stand out and pop. This series has been so much fun for me and I am finding inspiration everywhere. 

20220116_210343

This series has been very good practice at combining techniques and stretching  creative muscles that I haven’t used in a while. I hope you are getting as much out of it as I am. 

In this tutorial, I will demonstrate how to make a Bell Flower using both Herringbone and Peyote stitch. The process is a little bit complex in that I utilized increasing and decreasing peyote between the larger petals and the smaller ones to create a great bell shaped flower.

Materials List

I added a 10 mm pearl to the center afterwards so I will talk you through the steps at the end of the lesson. 

I couldn’t find affiliate links for the beads I used, but they are readily available on your favorite beading sites. 

The links in this article are my affiliate links. I make a small commission when you use the links to purchase products. Please help support the free content on this site by using my links when feasible.

The Base Row

Build a base row using the two bead ladder stitch technique, alternating between the 8/0 and 11/0 seed beads in sets of two for a total of twelve stacks two beads high. 

20220120_100858
20220120_101255

Sew up through the first stack and back down through the last stack to close the strip into a round. 

Pull the two ends together snug and then sew back up through the first stack again to step up. 

20220120_101324

Rows 2 - 4

20220120_101355

Stitch three rounds of tubular herringbone using 8/0 and 11/0 beads to match the base row beads.

Remember to step up though two beads at the end of each round.

For each of the remaining rows other than the very last one, add a normal herringbone stitch of two beads to the corresponding columns. 8/0’s about the 8/0’s below and 11/0’s above the 11/0’s below. The difference will be what we do between these stitches to form our delicate flower.

Row 5

20220120_102459

In this row, do an increase between each column of herringbone. Add the first 8/0 beads to column one. Pick up a 15/0 and sew up into column two. Add the 11/0 beads of this column then pick up an 11/0 and sew up into the next column. 

Repeat the steps until the end of the row and step up as your normally would.

Rows 6 -8

On the 6th row, add two 15/0 beads between each column 

20220120_102905
20220120_103317

On the seventh row add three 15/0 beads between the the columns.

On the 8th row,add  a 15/0 – 11/0 – 15/0  between each of the columns.

20220120_103647

For the remainder of the project, we will use peyote stitch between each stich of herringbone on the six columns.

Row 9

20220120_104053

Add the beads to column one and pick up and 11/0 bead and sew through the 11/0 of the previous round.

Pick up and 11/0 and sew up into the next column. Repeat these steps all the way around the row and step up.

20220120_104107

Row 10

20220120_114410

Add the beads to column one and pick up and 11/0 bead and sew through the first 11/0 sticking out. 

Pick up and 11/0 and sew through the next 11/0 sticking out and up into the next column of 11/0’s.

20220120_114430
20220120_114909

Add the beads to column two and sew into the first 11/0 sticking out without added a bead.

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_114925
20220120_114940

Pick up an 11/0 and sew up into the next  column of 8/0 beads.

Repeat these steps all the way round and remember to step up through two beads at the end. 

Row 11

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_115316
20220120_115332

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the the top bead of the next column. Add the two 11/0 for this column.

20220120_115348
20220120_115415

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_115429
20220120_120013

Pick up and 11/0 and sew into the next column. 

Repeat these steps all the way round and remember to step up through two beads at the end. 

Row 12

Add the 8/0 beads to column one. Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_120419
20220120_120438

Pick up and 11/0 and sew through the next bead sticking out.

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_120458
20220120_121102

Without picking up, sew up into the top bead of the next column. Add the two 11/0 beads to this column.

Again, without picking up, sew through the next 11/0 sticking out.

20220120_121141
20220120_121200

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_121225
20220120_121252

Pick up and 11/0 and sew through the bead on the next column.

Repeat these steps all the way round and remember to step up through two beads at the end. 

Row 13

On this last row, add only one bead to the top of each 8/0 column of herringbone.

20220120_122445
20220120_122459

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_122513
20220120_122530

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the 11/0 at the top of the next column. Add a single 11/0 at the top of this column (not shown).

20220120_122547
20220120_122617

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the next 11/0 sticking out. 

20220120_122630
20220120_122643

Pick up and 11/0 and sew through the next 11/0 sticking out. 

Pick up and 11/0 and sew through the top bead of the next column. 

20220120_122731

Repeat these steps all the way round and remember to step up through two beads at the end. 

Without picking up any beads sew through the beads to each 11/0 column and add a single 11/0 bead to the top each.

Sew back down the 11/0 beads of the last column to the bottom of the flower.

Note* I haven’t added the single 11/0 beads at the top of the shorter columns or the pearl in these photos. 

20220122_165829

I will demonstrate adding the center bead in an upcoming tutorial for this Petunia flower.

I hope you have enjoyed this project and are having a wonderful time with the Flowers Flowers Everywhere series. See you in the next post.

Thanks for stopping by.....